Multi Plug Socket Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.31 – €2.82 net (excluding VAT)
For file: PlugSocket 2_2_0.2mm_PLA_MK3S_2h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.57 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 2.81 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Minimalistic wall/desk/ceiling mount/holder * can be used for various sockets * only needs 3 screws
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 178
- Makes
- 0
- Views
- 541
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
easy to print it with PLA (see attached G-Code)
some support needed
used some standard wood screws and some fitting washers
I would advise you to choose some smaller screws than your holes are to leave room for some tolerance offset