Battlebot Remix - Dampf / Rakete
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Johannes Battlebots remix
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
First of all, a big thank to Johannes for the great robots and the excellent building and installation instructions!
I used 360° servos and connected them to D2 (left) and D3 (right) on the WeMos.
Changed the housings to "DAMPF" and "RAKETE". The cut-out (8.5x14.3 mm) for a rocker switch and the holes for M 3 screws are enlarged on the cover. For "DAMPF" ,use the original "SteamEdition" housing by Johannes.
I added a suitable toothing for the SG 90 servos on the rims. To print the rims "outer wall before inner wall" must be activated, and with "horizontal hole extension" or "horizontal extension" you can set the toothing to match the servo. If you measure 4.70 mm with a caliper gauge, the rims fit very well.
I attached a tractor profile to the tire and printed it with Recreus Filaflex (TPE).
Tutorial for building the robot in German: https://omg-3d.de/