1 / 15
OneBlade 360 travelchest / KCD II working key lock — image 1
1 / 15

OneBlade 360 travelchest / KCD II working key lock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Travel chase for Philips OneBlade 360 QP4631/65 in a Kingdom Come Deliverence II design

Rating
0 / 5
Likes
14
Downloads
28
Makes
0
Views
223
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Standard Digital File License

A travel case for your Philips OneBlade 360 and your accessories, featuring a "Kingdom Come Deliverance II" wooden chest design. 

I chose the yellow interior and the Icon to align with the design language of KCD2. 

You can fit: 

  • Philips Oneblade 360

  • 2 x blades

  • 1 x USB charging cable

  • and some additional accessories in two big slots

A key hidden on the backside opens and closes the chest.

The assembly is straight forward: just slide the metal parts on it until the click in. Don't forget to put in the keyguard the right way ( the slots facing left and down) befor clipping on the top metalbar. There is no support structure needed if you printer can print overhang angles of 22,5°. The Kingdom Come 2 icon glued to the embed position on top, i use left over melted filament to fix it in place. for the Key there is a supportstructure needed.

Don't be shy of breaking the hinges free, but do be careful. Same with the keyhole, I used a gentle hammer tap to get it free. 

Your Printer needs to pass a 0.3 mm tolerance test. 

You can decide between

  • printing the KCD2 icon as in the pictures separately and in clolour (OB-03_...1.1 ; OB-03_...1.2 and KCD2_icon required) you also need a way to glue it into place, i use leftover filament. 

  • or printing it emdedded into the metal band then you need (OB-03_...2.1 ; OB-03_...2.2)

I tested it with PLA, coconut brown, sunflower yellow and some leftover no name grey filament.

Enjoy.

Tags