1 / 4
Minisforum 10" rack mount MS-01 MS-A1 MS-A2 MS-R1 — image 1
1 / 4

Minisforum 10" rack mount MS-01 MS-A1 MS-A2 MS-R1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

10 inch 1U rackmount for Minisforum MS-01 / MS-A1 / MS-A2 / MS-R1

Rating
4 / 5
Likes
18
Downloads
164
Makes
1
Views
1,848
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

This is a different approach to rack mounting Minisforum MS series. Instead of holding the original casing, it replaces it, allowing 1U mount* for the machine

Also features 2x keystone jacks and ears for a cable clip and a flush button pusher.

FreeCAD source files are provided for your convenience.

Limitations

  • The device itself is a bit thicker than 1U. While I did my best to make it fit, the very rear part is still thicker.

  • The device must have bottom vents free to cool SSDs, and preferable top vents too

  • Because of that both, you can't mount multiple MS units directly stacked on top of each other; but it'll work fine if you interleave them with short 1U modules

  • The top/bottom covers are only for IP20 ingress protection; they provide no EMI shielding. Use it in an enclosed rack or deal with EMI yourself.

  • Because of space constrains it'll only fit smaller keystone modules.

  • Tested on MS-01 and MS-A1 but I see no reason it won't work on MS-A2, MS-R1 and similar future models.

Printing instructions

Main body

You need well calibrated printer with at least 220x220mm build plate to print this. Best printed in PETG – it'll keep the dimensional accuracy but won't melt like PLA if the device overheats.

Main model features solid front panel designed for slicer-made vents – beautiful, fast and sophisticated. 

To get them, set Perimeters to 5, set Gyroid / Hex / other neat infill pattern; then add a Modifier Cube to your build plate, roughly align it with front panel vents, then set modifications to: 

  • Top layers: 0 / 0mm

  • Bottom layers: 0 / 0 mm

Preview your results in sliced view.

If you don't like slicer-generated vents (or watched too many Slant 3D videos), use the alt model with pre-made vents. They aren't as cute though.

Button pusher

Print it in something bright / translucent. If the button, when lit, is not bright enough, make it hollow:

  • Perimeters: 1

  • Top layers: 1 / 0mm

  • Bottom layers: 1 / 0 mm

Tags