Repairing a Broken Base Cap, LOCKSYS Key for House Door
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.13 – €0.16 net (excluding VAT)
For file: Broken Locksys Key Cap_0.4n_0.2mm_PETG_MK4IS_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 9 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Quick fix for a broken plastic part on a house key!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello!
Have you ever broken the plastic part of a similar key that you use to unlock your front door at home? If so, you know how much it costs to have a duplicate made. No worries, because with this model, in about 10 minutes, you can replace the broken upper part of the key yourself and hang the key back up like before! Simply print the PETG part and apply instant adhesive or epoxy resin to the perfectly cleaned part of the key, then insert it into the hole all the way.
Use "Snug'' supports. Cleaning will be easiest!
Now everything is fine! :)