Double stacked SSD mount for Fractal Design SSD Tray Type B
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount 2 SSDs to the Type B SSD tray for Fractal Design Cases
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 213
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount allows you to double stack your SSDs for more drives and capacity. The mount is designed primarily for the Type-B SSD tray when mounted on the back side position in the Fractal Design Define 7 but is also compatible with the 2 internal mounting positions that are on the PSU cage.
Parts
You'll need 8 standard SSD screws. (M3)
Instructions
The outer SDD must be attached first. Simply insert your screwdriver through the bottom drive's mounting holes to secure in place.
The inner drive is to be mounted with the SDD tray at the same time. the raised portions of the SSD tray should fit within the indents on the mounts.
the holes on the mounts should align with those on the SSD and tray and is assembled like a single SSD with the mounting holes being in-between the SSD tray and drive.
Orientation of the drive stack doesn't matter though the connectors will stick out more if the connector end is opposite the thumbscrew end.
Printing
They should be placed on the flat sides to avoid supports.