Airups Barricade Vacuum Nozzle Attachment Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This nozzle friction fits onto 1-7/8" vacuum tips, threads onto Airups barricade vents, and holds them open for suction.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 1
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This nozzle friction fits onto 1-7/8" vacuum tips, threads onto Airups barricade vents, and holds them open for suction. Otherwise, the vacuum can fall off or have the other side of the barricade get sucked into the port and stop deflation.
When fully deflating, make sure to push down the far edges of the barricade and wait until the vacuum gets much louder and the barricade stops shrinking, then unthread the nozzle without pulling untill you hear a hiss, then quickly pull the nozzle away and screw a cap on.
I suggest 4 walls, 20% PETG but anything should be fine, and this needs no supports when oriented properly.
If you want a new vacuum size or length feel free to modify this using the step or ask me!