1 / 8
Honeywell TurboForce Fan HT-900 Pivoting Wall Mount — image 1
1 / 8

Honeywell TurboForce Fan HT-900 Pivoting Wall Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ability to mount the fan to the wall and pivot to get better directional flow. Twist motion has detents to hold spot.

Rating
5 / 5
Likes
13
Downloads
62
Makes
1
Views
430
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to be able to change the pivot/spin direction of my Honeywell Turboforce HT-900 fan after it was mount on the wall.  Between this spin and the normal tilt of the original fan, I can point the airflow in almost any direction.   

I printed most items in PETG for additional strength over PLA.  The detents were printed in PLA, as it worked better for the little springs - PETG was too stiff.

Follow the pictures for assembly order.  I used a small bolt/nut with washers through the middle of the three main pieces to hold it all together before mounting.  I also used crazy glue / CA between the arms and the round spinbase piece.  Mount to the wall with your favorite screws and anchors, as needed.

 

 

 

Tags