1 / 8
Honeywell TurboForce Fan HT-900 Pivoting Wall Mount — zdjęcie 1
1 / 8

Honeywell TurboForce Fan HT-900 Pivoting Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ability to mount the fan to the wall and pivot to get better directional flow. Twist motion has detents to hold spot.

Ocena
5 / 5
Polubienia
13
Pobrania
62
Wydruki
1
Wyświetlenia
430
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to be able to change the pivot/spin direction of my Honeywell Turboforce HT-900 fan after it was mount on the wall.  Between this spin and the normal tilt of the original fan, I can point the airflow in almost any direction.   

I printed most items in PETG for additional strength over PLA.  The detents were printed in PLA, as it worked better for the little springs - PETG was too stiff.

Follow the pictures for assembly order.  I used a small bolt/nut with washers through the middle of the three main pieces to hold it all together before mounting.  I also used crazy glue / CA between the arms and the round spinbase piece.  Mount to the wall with your favorite screws and anchors, as needed.

 

 

 

Tagi