CHAMELEON v3 - Accessories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A growing collection of accessories for CHAMELEON v3.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 63
- Makes
- 1
- Views
- 704
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
As always, I'm open to suggestions. Feel free to drop requests in the comments! And, if you would like to support my work, please visit my Ko-fi! - RAF
= Future Changes =
Will add things as I come up with them -- or get suggestions.
= Change Log =
null
= Printing Suggesstions =
4 Walls / 20-30% Cubic Infill / No Supports
Tested in PLA and PETG
= Neutrik Replacement =
This model fits in the hole for the Neutrik NA-USB. As Neutrik seem to be getting more expensive, this is a way to save some money -- if you don't mind a semi-permanent cable. Simply put the cable in between the two halves, insert it into the hole, and screw it down. I only tested it with a few cables, and the cable clamped pretty well. If you find it doesn't work for your cable, let me know and I can make some adjustments.
= Cable Tie-Off =
I made this to prevent the cable from getting pulled out of the Neutrik. But it also works as a way to stow the cable. The slot in the back will accommodate a pretty thick piece of Velcro, or a cable-tie. The space in the front helps clamp down the cable when you tighten it. Will require swapping the existing bolts out for M6x50mm bolts.
= More to Come! =
I have some other ideas I haven't tried yet. Please let me know if you have any requests!
RAF