Kinematic optical mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a kinematic optical mount suitable to hold round optical elements with 1'' diameter
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 11
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
A kinematic optical mount for 1'' optical elements.
You will most likely want to mount it differently, like on a post or in another rigid way as you will move the entire mount when adjusting the screws screwing up the alignment. I included it soley for demonstration purposes.
The center of the optical element is 1/2'' + 1cm over the mount point.
Additional Material for the Mount
2 Ball bearings 1cm
2 rubber bands
3 heat set inserts (holes are 4.1mm diameter and 8mm depth)
1 M3 x 8 screw
2 M3 x 20 screw
Additional Material for the Leg:
1 heat set insert