1 / 4
AD5X Carbon Filter Box + HEPA (For internal circulation mod) — image 1
1 / 4

AD5X Carbon Filter Box + HEPA (For internal circulation mod)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Combination mod for those that have the Air Circulation mod in their AD5X, and additionally the Hygrometer cover.

Rating
0 / 5
Likes
11
Downloads
48
Makes
0
Views
523
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Use in conjunction with Internal Circulation mod:

https://www.printables.com/model/1473971-ad5x-internal-circulation-air-filtration-duct-with

And additionally I made it for use with the Hygrometer/Temp cover with holes:
https://www.printables.com/model/1430378-ad5xad5m-vent-cover-with-cutout-for-tempmoisture-s


Info:
Only useful with the items above. Some would argue which filter should go in what order, but this is what I chose. When filling the container with carbon pellets, use a vacuum to get all the dust out, so it doesnt prematurely clog your filter. My carbon bag was full of dust.

Filter housing is a tight fit. I'd measure and adjust the model if you need, step file is included. The printers housing also looks to have somewhat of a taper fit, so it will require force to get this to sit in.

I chose this model with the Hygrometer in place, as it it will actually show you circulated air temp/humidity versus placing the hygrometer anywhere else.

Additional Items:
Filter - This filter is actually too short but does fit. I cut up another filter to raise it up, and stuck it underneath. Could also just print out a rectangle block for it to sit on and raise it to the exit hole

https://www.amazon.com/dp/B0CK2QT3KW

Tags