AD5X Carbon Filter Box + HEPA (For internal circulation mod)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combination mod for those that have the Air Circulation mod in their AD5X, and additionally the Hygrometer cover.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use in conjunction with Internal Circulation mod:
https://www.printables.com/model/1473971-ad5x-internal-circulation-air-filtration-duct-with
And additionally I made it for use with the Hygrometer/Temp cover with holes:
https://www.printables.com/model/1430378-ad5xad5m-vent-cover-with-cutout-for-tempmoisture-s
Info:
Only useful with the items above. Some would argue which filter should go in what order, but this is what I chose. When filling the container with carbon pellets, use a vacuum to get all the dust out, so it doesnt prematurely clog your filter. My carbon bag was full of dust.
Filter housing is a tight fit. I'd measure and adjust the model if you need, step file is included. The printers housing also looks to have somewhat of a taper fit, so it will require force to get this to sit in.
I chose this model with the Hygrometer in place, as it it will actually show you circulated air temp/humidity versus placing the hygrometer anywhere else.
Additional Items:
Filter - This filter is actually too short but does fit. I cut up another filter to raise it up, and stuck it underneath. Could also just print out a rectangle block for it to sit on and raise it to the exit hole
https://www.amazon.com/dp/B0CK2QT3KW