1 / 3
Parkside PPWD 30 B2 osVAC with relief valve
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A female 32mm osVAC adpapter with relief valve for Parkside PPWD 30 B2 osVAC.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I prepared two files with 0.4mm and 0.2mm clearance between the adapter and the shutter ring.
As the shutter ring is free floating, you should support it. I placed the osVAC part on the bottom and used support on the base of the ring and for the hole(s) in the ring.
To mount it on the original suction tube, you might need to deburr below the locking slot, so it better slides over the pins.
