1 / 3
Parkside PPWD 30 B2 osVAC with relief valve
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A female 32mm osVAC adpapter with relief valve for Parkside PPWD 30 B2 osVAC.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I prepared two files with 0.4mm and 0.2mm clearance between the adapter and the shutter ring.
As the shutter ring is free floating, you should support it. I placed the osVAC part on the bottom and used support on the base of the ring and for the hole(s) in the ring.
To mount it on the original suction tube, you might need to deburr below the locking slot, so it better slides over the pins.
