NEVADA vacuume pipe connector/adapter 49mm/50mm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.03 – €6.15 net (excluding VAT)
For file: SUPERPRINT-PETG_0.4n_0.2mm_PETG_COREONE_5h6m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.59 excluding VAT (range midpoint).
- Weight reported by the author
- 86 g
- Print time reported by the author
- 5.1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
It is 49mm inner dia for pipe side and 50 outer dia for vacuume. It is specific for NEVADA or similar.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
As you can see in the photos, the original part was broken. I couldn’t find a suitable spare part, nor any existing 3D model for printing, so I designed and made this adapter myself.
The Nevada vacuum cleaner I made this for is quite old, so I’m not sure whether this adapter will be compatible with other brands or models. However, it may be possible to customize it if needed.
In the first photo, you can see the printed adapter installed in the vacuum. The locking button works correctly, and the adapter locks firmly in place. The pipe screws into the adapter using a reverse (counter) thread.
IMPORTANT: Check orientation photo, you should print it like that, less supports.