NEVADA vacuume pipe connector/adapter 49mm/50mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is 49mm inner dia for pipe side and 50 outer dia for vacuume. It is specific for NEVADA or similar.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
As you can see in the photos, the original part was broken. I couldn’t find a suitable spare part, nor any existing 3D model for printing, so I designed and made this adapter myself.
The Nevada vacuum cleaner I made this for is quite old, so I’m not sure whether this adapter will be compatible with other brands or models. However, it may be possible to customize it if needed.
In the first photo, you can see the printed adapter installed in the vacuum. The locking button works correctly, and the adapter locks firmly in place. The pipe screws into the adapter using a reverse (counter) thread.
IMPORTANT: Check orientation photo, you should print it like that, less supports.