1 / 3
SKS Mudrocker – Adjustable TPU Adapter for Raising Rear Fender (MTB) — image 1
1 / 3

SKS Mudrocker – Adjustable TPU Adapter for Raising Rear Fender (MTB)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

upgraded rubber adapter for the SKS Mudrocker rear fender to solve the limited adjustment range of the original

Rating
0 / 5
Likes
3
Downloads
21
Makes
0
Views
96
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The stock SKS adapter only allows two tilt positions, which makes it impossible to sufficiently raise the rear section of the fender. This becomes an issue when using wider tires or when additional clearance is needed for suspension travel.

The Solution

This redesigned adapter allows you to:

  • Raise the rear part of the fender by several centimeters

  • Fine-tune the fender angle

  • Improve compatibility with wider MTB tires

  • Increase tire clearance under compression

The geometry keeps compatibility with the original SKS mounting system while extending the height adjustment range.


🛠 Material & Print Settings

Printed from PM TPU96.

Recommended settings:

  • Material: TPU (95–98A recommended)

  • 40% infill and 2 perimeters

  • Supports required

  • Print flat on the bed as oriented in the STL

Flexible filament is strongly recommended to maintain durability and vibration resistance similar to the original rubber part.


🚴 Compatibility

  • SKS Mudrocker rear fender

  • MTB frames

  • Suitable for setups with wider tires



Popis (CZ)

Tento 3D model je náhradní / upravený gumový adaptér pro zadní blatník SKS Mudrocker, který řeší omezené možnosti nastavení originálního dílu.

Problém

Standardní adaptér umožňuje pouze 2 polohy sklonu, což v praxi neumožňuje dostatečně zvednout zadní část blatníku. To může být problém zejména při použití širších plášťů nebo při potřebě většího prostoru při propružení.

Řešení

Tento upravený adaptér umožňuje:

  • Zvednout zadní část blatníku o několik centimetrů

  • Jemnější nastavení sklonu

  • Lepší kompatibilitu se širšími MTB plášti

  • Větší rezervu prostoru mezi pláštěm a blatníkem

Geometrie zachovává kompatibilitu s originálním uchycením SKS, ale rozšiřuje možnosti výškového nastavení.


🛠 Materiál a tisk

Vytištěno z PM TPU96.

Doporučené nastavení:

  • Materiál: TPU (ideálně 95–98A)

  • 40% výplň a 2 perimetry

  • s podpěrami

  • Tisk naležato dle orientace STL

Pro zachování pružnosti a odolnosti proti vibracím je pružný materiál silně doporučen.

Tags