1 / 3
Cleaned Enclosure for LED Driver Board for Seeed Studio XIAO
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cleaned Enclosure LED Driver Board from Seeed Studio, removed Logo, round antenna hole and added holes for the terminals
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Intro
I wanted a version, which is clean (no Logo's) and has only openings for what I have (no big antenna hole).
Filaments:
PETG - the ESP32 can get hot, therefor something more heat resistent then PLA should be used
Printed Parts:
led-driver-board-for-xiao-enclosure-top-v2_cleaned.stl
0.2mm layer height
30%-50% infill (the stand-offs for the screw holes are not very supported with less infill)
support everywhere
use the back part from the original model
Non-Printed Parts:
3x M2 10mm screws