Photon S Z-stop spacer for Sovol FBS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjuster to increase your z-stop height when using Sovol magnetic flexible build plate.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 284
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This 2.2mm thick print is to be installed between your z-stop probe and the z-carriage on a Photon S when using a Sovol flexible build system. The Sovol instructions say that it will add about 2.6mm in height to the build plate, but I found (after trying multiple heights) that 2.2mm works best for my printer.
The good news is if you need a thicker z-stop spacer you can just change the height of this print in your slicer. I also replaced my screws with M3x8 to make sure there was a solid connection with the z-carriage.
I printed at 0.1mm layer height for accuracy with PETG on a Prusa MK3S+.