8020 10 Series Overlay Panel Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quarter turn panel mount designed for 1/4-20 nuts that are 5.6mm thick and 11mm face to face. Nylock nut version also.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Needed a lot of panel mounts and my vendor of choice was completely out of stock. Created a Fusion model and made my own. Since I could customize the slot for the nut, I didn't see any need for the extra thin 'fin' that the commercial version has (which I assume takes up slop between various nut thicknesses).
There's 2 versions of the model - one for regular nuts (5.6mm thick) and one for nylock nuts (8.2mm thick). Both nuts are 11mm face to face.
I add height modifiers so that the 'neck' area is printed with solid infill for extra strength. Rest is just 20% gyroid and seems fine in PETG.
Pictures show the commercial version on the left, mine on the right.