8020 10 Series Overlay Panel Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quarter turn panel mount designed for 1/4-20 nuts that are 5.6mm thick and 11mm face to face. Nylock nut version also.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Needed a lot of panel mounts and my vendor of choice was completely out of stock. Created a Fusion model and made my own. Since I could customize the slot for the nut, I didn't see any need for the extra thin 'fin' that the commercial version has (which I assume takes up slop between various nut thicknesses).
There's 2 versions of the model - one for regular nuts (5.6mm thick) and one for nylock nuts (8.2mm thick). Both nuts are 11mm face to face.
I add height modifiers so that the 'neck' area is printed with solid infill for extra strength. Rest is just 20% gyroid and seems fine in PETG.
Pictures show the commercial version on the left, mine on the right.