1 / 6
PTFE-Tube-Cutter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4mm PTFE-Tube-Cutter
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 31
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
PTFE cutter for cutting 4mm PTFE tubing.
The two base pieces with alignment pins are easy to glue together.
Then insert four segments of a 9mm cutter blade and secure them with the screw (M5).
You will need four segments of a 9mm cutter blade 60°.
Best results with a single-edged blade.
Printed with Annycubics PLA+ Flash Green and Bright Red.
LW 0.4 LH 0.1
4 Perimeters only 1 at Top Layer
4 Top/Bottom Layers
Top Pattern Concentric
20% Honeycomb Infill
Speed 150mm/s
Print time approx. 68 min.
It also cuts filament very well.
But remember... Cut three times and still too short ;-)