1 / 4
RAKshare - RAK Unify 180x130x60 Waveshare 1W Bracket — image 1
1 / 4

RAKshare - RAK Unify 180x130x60 Waveshare 1W Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.48 – €3.03 net (excluding VAT)

For file: Plate_0.4n_0.2mm_PETG_MK4IS_2h29m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €2.75 excluding VAT (range midpoint).

Weight reported by the author
43 g
Print time reported by the author
2.48 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Bracket for the RAK Unify 180 enclosure to mount a Waveshare Solar board, INA3221, 1S3P 18650 battery, and RAK 1W radio.

Rating
0 / 5
Likes
4
Downloads
28
Makes
0
Views
326
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain
About

I'm calling this the RAKshare. A bracket for the RAK Unify 180x130x60mm enclosure to mount:

  • RAK 1W booster 19007 / 3401 / 13302 board.

  • Waveshare Solar Power Manager (D).

  • Adafruit INA3221 STEMMA QT board for power monitoring.

  • Adafruit (or other) 1S3P 18650 battery packet.

I've chosen the Waveshare board to pair with the RAK 1W because it has a bit higher 3A output on the 5V than other solar board which are closer to 1A only. The RAK 1W needs about 1.5A to safely prevent brownouts on the nrf52840.

Wire the 5V out from the solar board to the EX_5V connector on the RAK13302. Set the jumper to EX_5V. This will power both the radio and the nrf52840. I'm using the RAK13009 QWIIC connector to go from the 19007 to the INA3221. Wire the positive leads from solar and battery (and 5V out if you want) through the INA3221 to monitor them.

Print Settings

I recommend printing with 3 walls. Everything else can be to your liking. I didn't need any supports for the overhangs on PETG.

Onshape

This is made in Onshape and you can find the model at https://cad.onshape.com/documents/b2b9aafbfca203bf8292adbf/w/ae13ed7bb997ac5dd982b0cc/e/b0c64f7e5f04313193bde974?renderMode=0&uiState=6994b7c93e4eb57a7bf23348

Tags