1 / 6
Raspberry Pi Zero 2W with USB and LAN RJ45 HAT Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case with Snap-in Lid for Raspberry Pi Zero 2W and Waveshare Ethernet / USB HUB HAT.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 82
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Designed for: Pi Zero 2W and Waveshare Ethernet / USB HUB HAT für Raspberry Pi Zero, 1x RJ45, 3x USB.
Case with Snap-in Lid. No tools required.
Use provided Stand-Offs in the Waveshare-Set. I used 1mm nylon-washers between the Standoffs and the Waveshare-board.
I used 2x M2 heat inserts with 2.5 mm length.
Two versions are available. With and without mount. Otherwise they are the same.
Step Files attached, feel free to adjust to your liking.
No supports required. Case is designed for 0.4mm nozzle and 0.2 mm layer height.