1 / 5
Muzi Works Base Uno/Duo Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the Muzi Works Base Uno or Duo and SuperIO PCB. Fits a 803450 LiPo Battery
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 52
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
I printed the upper and lower part in ABS and the Buttons in PLA. The Buttons are a little tricky to print, i used a 0.2mm nozzle and a layer height of 0.08mm.
Hardware required:
5x M2x4mm Brass inserts
4x M2x12mm countersunk screw
1x M2x6mm countersunk screw
MuziWorks Base Uno or Duo
MuziWorks SuperIO
803450 LiPo Battery
Using Carbon fibre reinforced Filament might block the signal to the 2.4GHz Antenna on the Duo.