Ajax Systems Mount Adapters: MotionDetect + MotionCam Outdoor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount adapters for Ajax Systems detectors: - MotionDetect: Corner - MotionCam Outdoor: 45° wall and 36mm tubular
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 53
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
📦 Ajax Systems Wall Mount Adapters
MotionDetect Corner Adapter + MotionCam Outdoor 45° Wall Mount
🧩 Overview
This upload contains three custom mount adapters designed for Ajax Systems detectors:
1 MotionDetect Corner Adapter
Angled corner bracket for installing MotionDetect units neatly in a room corner.
Fully parametric OpenSCAD model
Clean geometry for easy printing
Designed for stable corner placement
Important:
This model is a fork / adaptation of parametric_corner_bracket.
2 MotionCam Outdoor 36mm Tubular Mount
Mount for installing MotionCam Outdoor units neatly on a 36mm diameter tube.
3 x M4 Hex screws are used
Important:
This model is a fork / adaptation of Street Lamp Pole Mount.
3 MotionCam Outdoor – 45° Wall Mount
Rectangular mounting plate for 45° angled outdoor installation of MotionCam Outdoor.
Two variants are provided:
Left-edge version → Detector aims right
Right-edge version → Detector aims left
Ideal for:
Side walls
Facades
Entrance coverage
Optimizing detection angle
🗂 Included Files
Parametric sources → OpenSCAD (.scad)
Ready-to-print meshes → STL (.stl)
Files are intended for both modification and direct printing.
🖨 Recommended Print Settings
For best mechanical strength and outdoor durability:
Material: PETG
Infill: ~25%
Perimeters: 3+ recommended
Supports: Usually not required
Layer height: 0.2 mm works well
PETG provides better flexibility and UV resistance than PLA.
🔩 Hardware
Designed around common metric hardware:
Screws: M5
Heat-set inserts: Ruthex-style M5
Diameter: Ø6.4 mm
Length: 12 mm
🛠 Customization
All dimensions are parametric.
To adapt:
Plate thickness
Hole spacing
Insert depth
Angles / offsets
Simply edit the parameters inside the .scad files.
⚠ Disclaimer
This is a community-made accessory and is not affiliated with or endorsed by Ajax Systems.
Use at your own discretion and verify dimensions before installation.