Lathe Tool Centering Gage
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.63 – €0.77 net (excluding VAT)
For file: Lathe Tool Centering Gage_0.6n_0.32mm_PETG_COREONE_18m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.70 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 18.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple tool for centering your lathe tools with a cheap bubble level.
Additional hardware
10 mm Steel Rod 80-100 mm length
Bearing 6000 2RS (26x10x8 mm)
Bubble Level 40x15x15 mm
e.g:
https://www.amazon.de/dp/B0DGGHQCYY?th=1
and
https://www.amazon.de/dp/B07XDX7B2W
The bubble levels are all rather inaccurate. A shim (foil, paper) will be needed to compensate that. Also ensure that the sides where level and tool are resting are plain - use a file.
Mounting: Glue shim and level on top of the model.