Brother E550W/PT-H500 bracket for Multiboard

A bracket to hold the Brother E550W/PT-H500 label printer (P-touch system) on a Multiboard wall.

Note: This will not work with the Brother P-Touch E560 which is slightly larger.

You need two or four Multibuild Lite Fix Points to attach this to a Multiboard Plate.

How I made this

This is also a demonstration how easy you can modify existing objects to make them Multiboard compatible. 

I used basic PrusaSlicer features to add a Generic-Slab part to the back to remove the existing holes. The required dimensions were measured with the Measuring Tool.

Then I used two Lite Multipoint Rail - Negative remix parts from the official Multibuild repositor to cut out the Fix Point rails. Both rails need to be multiples of 25 mm apart to stay in the Multiboard grid.

Sometimes you need to experiment with positioning a little, but using the coordinate system to adjust the values instead of moving parts around with a mouse makes things easier. 

You can see how everything went together in the 3MF file.

Print settings

Print with usual Multiboard Settings:

• 0.4 mm nozzle

• 3 perimeters wall thickness

• 0.2 mm layer height

• 15% infill

• no supports.

Apart from that, use your printer's and material's default settings.