Fusion Remix to Add or Remove Bin Magnet Geometry
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added parameter to Pred's Fusion file to determine if magnet geometry (i.e. holes) should be added or removed.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 1
- Views
- 118
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a simple modification of Pred's Fusion v1.2 file that allows the user to parametrically determine if the bin model will have or not have magnets.
In Fusion go into “Modify” → “Change Parameters” menus and change the “HasMagnets” parameter to either a “1” or “0” (i.e. zero). Changing the value to “1” adds the magnet holes to the bottom of the bin (as per Pred's original design); changing it to “0” removes the magnet holes and generates a flat bottom for the bin.
(Behind the Scene Details: A new sketch step and extrusion step were added to the Timeline. The "HasMagnets" parameter is used to determine the extrusion value needed to either keep or remove the existing magnet geometry. See the “ExtrusionMagnetsNoMagnets” parameter for more details.)
I hope this is helpful. Have fun!