1 / 5
Makita RP0900 Router "Lever"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The lever to set the hight
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial

I broke my lever on my router, so 40mins later i was on track again.
It fit tight, i screwed the m8 bolt out of the router and hammered it down.
Print and slice
Before you print just perform a cut in prusaslicer or whatever you use and try out how it fit your m8, and remember it has to be tight so it dont fall of.
My print settings:
- Petg
- Resolution: 0.3mm
- Support: Yes. ( inside where the m8 goes in you dont need anything so block support)
- Infill: 40%( you could probely go down)

Goodluck, and happy printing… hasta la vista