RC crawling track
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fast printable indoor crawling track for small RC crawler or scaler like Orlandoo Hunter, Axial SCX30 or similar
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 40
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I wanted to make a small indoor crawling course for my orlandoo hunter, wich is fast to print and does not need a lot of material. So i made 5 pieces, which can be printed in vasemode and can be coupled together.
I printed all parts in vasemode, 1,2mm extrusion width for the outer perimeter, 0,25mm layer hight and 6 bottom layers, material pla. Printed on a Prusa core one without brim.
The parts have to be printed "upside down" like the 3D models are made. All parts fit on a small printer bed with 180mm x 180mm.
Printing time and used filament in gramm:
Track_vasemode_01: 58min / 50,74g
Track_vasemode_02: 1h20min / 92,57g
Track_vasemode_03: 1h22min / 73,17g
Track_vasemode_04: 1h31min / 82,8g
Track_vasemode_05: 1h33min / 110,43g
Total: 6h44min / 409,71g
I think, the parts will also work for larger scale rc crawler like the axial scx24 or similar ones when you scale the parts up to 133%, but i have not tried it.
Have fun!