RC crawling track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast printable indoor crawling track for small RC crawler or scaler like Orlandoo Hunter, Axial SCX30 or similar
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to make a small indoor crawling course for my orlandoo hunter, wich is fast to print and does not need a lot of material. So i made 5 pieces, which can be printed in vasemode and can be coupled together.
I printed all parts in vasemode, 1,2mm extrusion width for the outer perimeter, 0,25mm layer hight and 6 bottom layers, material pla. Printed on a Prusa core one without brim.
The parts have to be printed "upside down" like the 3D models are made. All parts fit on a small printer bed with 180mm x 180mm.
Printing time and used filament in gramm:
Track_vasemode_01: 58min / 50,74g
Track_vasemode_02: 1h20min / 92,57g
Track_vasemode_03: 1h22min / 73,17g
Track_vasemode_04: 1h31min / 82,8g
Track_vasemode_05: 1h33min / 110,43g
Total: 6h44min / 409,71g
I think, the parts will also work for larger scale rc crawler like the axial scx24 or similar ones when you scale the parts up to 133%, but i have not tried it.
Have fun!