Stake out pole holder 5/16 bolts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For ~5/16" (~7.75mm) sized t-bolt hardware, hole/slot upsized to around 8mm. Fixed section for stake out pole
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Only had 5/16" (~7.75mm) T-bolts on hand, so upped the slot and hole sizes while beefing up the edges around it to make up for the bigger slot/hole to not lose strength. Also rounded some edges, and fixed the pole hole that would cause floating layers and weird edges around it with some layer heights.
v3 has the hole set as 8mm, may be to tight depending on your printer accuracy as I had to ream mine with a 5/16 bit
v3.1 I changed it to 8.25mm to help with that tolerance, though I won't print it to test it myself as I'm happy with the fit after reaming it
Printing with 0.6 nozzle at 0.3 layer height
5 walls with 5 top/bottom layers
15% gyroid infill. Will update if it breaks.
Filament used is from VoxelPLA (VoxelPETG) White PETG+ HS