Suction cup + wall hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Suction cup for your kitchen/bathroom tiled walls or for your windows and glass surfaces.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 41
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Suction cup for your kitchen/bathroom tiled walls or your glass surfaces. Also added a hook that goes on the suction cup. If you want to attach something else, I've also added a small hole in the suction cup's head so a small thread can pass through. Currently, there are 2 variants: one lighter and one heavier. The lighter one is a bit harder to print so it depends on your slicer settings which would fit you. For the print settings I used a default profile from creality with a few changes:
Nozzle Temperature: 230
Bed Temperature: 50
Print Speed: 35 mm/s
Layer Height: 0.2 mm.
I'd recommend to add some normal supports around the outer part of the suction cup. I tried printing it upside down without supports and got some overhangs so I wouldn't recommend it but you can still try, maybe you have better settings than mine.