Standard camera mount for Bear frame
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.21 – €1.48 net (excluding VAT)
For file: bear-frame-camera-mount-front.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.34 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.7 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a mount for a camera using a standard mounting screw (1/4-20) that attaches to the top corner of the front…
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 131
- Makes
- 2
- Views
- 875
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a mount for a camera using a standard mounting screw (1/4-20) that attaches to the top corner of the front 2040 extrusion of the Bear frame. It's designed to put the camera either on the front-left or front-right corner at a reasonable height to get a good view of the printing in progress.
It's working great with my Logitech C920S. To screw it down, I used a 1/4 in.-20 x 1 in. brass knurled screw.
Print instructions
- Prusament PETG
- Layer height: 0.20mm
- Infill: 15% (gyroid, but any should work)
- Supports: Yes