Prusa Balance Game Box Mod with Locking Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box and modded board with inserted magnets holding both pieces together without any other locking needed.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed box with inserted magnets and added magnets to the board. Now it holds closed and you won't be loosing game parts. Reused idea with the board stand.
You will need 12 pieces of 20x6x2 mm magnets. Pick box size you want. The smallest is for 2x 20 original figures, the highest can take 3x 20 or some bigger figure remixes. For playing figures see the original model or other remixes.
Print Instructions
Designed for 0.2 mm layer height
At least 3 perimeters for the 0.4 mm nozzle
No supports needed
Don't forget to pause the print at the right height to insert the magnets!
Use same polarity for all magnets!!!
Up to you if you print the board colored or single-color