Qotom Q730G5 for 10" rack

🧩 The model

I made this model for my Qotom Q730G5 S08 that is hosting my opnsense. The dimensions are the following : 155*127*48mm

There is only one model but I did upload the Fusion file with all the steps if you want to remove or add something. In this model you'll find : 

• With a single hole on the front plate, it's purely for cable management to pass the HDMI+USB cable on the back of my rack 

• Custom size which is ~1.5 U. For me it will be at the top of my rack therefore having an overhead on my front plate is not a constraint.

Maybe at some point I will try yo use vars to have only one model and have the flexibility to change the dimensions (but i still unsure how to do that on printable) 

Here the link of the Qotom model : https://www.qotom.net/product/MiniPC_Q10500G5_S08_Series.html

🔧 About the printing

Since it's a fanless device there is a thermal dissipation around it (the sides and on the top). I read online that the external temp could reach 50° at most so I wouldn't recommend using PLA (even if I did not test it) and instead use PETG

I printed it first horizontally but the result was not great (I had some humidity issue as well with my PETG so I can be biased) therefore i would recommend to print it vertically with the front panel as the base (doing that also make the front panel pretty if you have a textured plate)

Here my settings : 
- Print time ~3.5 hours with 15% infill. It seems pretty robust for me but feel free to raise this number
- PETG filament.
- Layer height 0.2mm
- Nozzle diameter 0.4mm