1 / 7
Spoolholder Side K1 / K1C
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spoolholder for Side mounting on K1 and K1C
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Since I designed my own external HEPA/carbon filter, the spool holder was in the way on the side, and I didn't have any space behind it.
So I designed this holder so the spool goes straight to the side.
The original Creality spool fits in the guide.
Printed with ASA. ABS and PETG are also possible.
The tolerances are good. It's best to print the part lying down. Support is best at the spool guides.
Perimeter: 4 walls, 4 top and bottom layers. Layer thickness 0.2 mm.