Carrera 132 Audi R8 LMS DTM Rear Wing / Spoiler / Heckspoiler 1:32 Slotcar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rear wing (spoiler) for the Carrera 132 (evolution or digital) Audi R8 LMS Slotcar.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 94
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heckspoiler für Carrera Audi R8 LMS
im Maßstab 1:32
Es wird empfohlen den Spoiler wie auf den Bildern gezeigt zu drucken (Rückseite nach unten auf Druckplatte) damit die Streben möglichst stabil sind.
Nach dem Drucken ist etwas Schleifen mit feinem Sandpapier auf der Rückseite notwendig, wo die Stützen befestigt waren.
Getestet am Audi R8 LMS Audi Sport Team (27532 / 30769). Sollte es bei anderen Modellen Probleme geben, gerne Feedback geben.
Ich habe die *.f3d Datei aus Fusion360 mit angehängt, falls man selbst noch Änderungen vornehmen möchte oder den Maßstab ändern muss.
*******************************************************************
Rear wing for Carrera Audi R8 LMS,
Scale 1:32
It is recommended to print the spoiler as shown in the pictures (back side down on the print bed) so that the struts are as stable as possible.
After printing, some grinding with fine sandpaper is necessary on the back where the supports were attached.
Tested on the Audi R8 LMS Audi Sport Team (27532 / 30769). If you experience problems with other models, please provide feedback.
I also attached the *.f3d file (Fusion360) in case you need some own modifications or you want to Change the scale.
*****************************************************************
Print Settings / Druckeinstellungen:
Material PLA or TPU
100% Infill
0,1mm Layer
Brim / Raft (for adhesion)
Supports on!