Corne Cherry V4 Case Bottom 6 deg incline
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an addition to the model created by @alko. This adds the inclined bottom for the Cherry-style board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is an addition to the model created by @alko (https://www.printables.com/model/1297216-corne-choccherry-v4-case). This adds the inclined bottom for the Cherry-style board, since the original model only contained an inclined bottom of 6 degrees for the Choc-style board. This is the same 6-degree inclined bottom, but for the Cherry-style board.
Materials used for assembly:
8x threaded insert (M2.5x4x3.5)
8x bolt with flat head (M2.5x8 → M2.5x10 is recommended though)
8x 8mm rubber bump pads to prevent sliding
Printed using PETG at 15% infill at normal quality settings, though PLA or other materials should work fine as well. Printing at a higher infill presumably makes the keyboard quieter, but I haven't tested this.