Garmin Edge Mount for Syncros ST-R100 - PA6-GF25 Optimized
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
High-stiffness, vibration-resistant Garmin mount Optimized for Syncros ST-R100 stems.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 57
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a high-performance, integrated Garmin mount specifically designed for the Syncros ST-R100-AL stem. It mounts directly under the stem faceplate for a clean, aerodynamic "pro-cockpit" look.
The geometry is specifically optimized for Industrial Filaments like PA6-GF25 or (PET-CF17, ASA). Unlike generic PLA mounts, this is designed to handle the high-frequency vibrations of road cycling and the weight of a Garmin Edge 840 without snapping or sagging.
Note on Model Files: > I am providing the STL files for this design. If you need a specific modification (e.g., a longer version or a different computer mount interface), please feel free to message me or leave a comment. I prefer to handle modifications personally to ensure the structural integrity of the design is maintained.
Technical Features
Adjustable Viewing Angle: The dual-bolt mounting system allows you to fine-tune the tilt of your device. You can set your device tilt, regardless of your stem's angle.
Recessed Inox Nyloc Nuts: Designed for M3 stainless steel self-locking nuts (nyloc) to ensure the mount never rattles loose on rough tarmac.
Material Optimized: Engineered with structural fillets to prevent delamination common in fiber-reinforced filaments.
Clean Integration: Fits perfectly with the unique shape of the Syncros stem cap.
Technical Features
Recessed Inox Nyloc Nuts: Designed for M3 stainless steel self-locking nuts (nyloc) to ensure the mount never rattles loose on rough tarmac.
Material Optimized: Engineered with structural fillets and reinforced stress points to prevent delamination common in fiber-filled filaments.
Clean Integration: Fits perfectly with the unique shape of the Syncros stem cap.
Print Settings (Tested with PA6-GF25)
Material: PA6-GF25 (Recommended), PET-CF17, or ASA. (Note: Do not use PLA/PETG as they will soften in direct sunlight and fail under load.)
Wall Loops: 6 (Crucial for structural integrity and bolt retention).
Top/Bottom Shell Layers: 6 (Ensures a solid interface for the mounting bolts).
Infill: 25% 3D Honeycomb (Provides superior multi-directional stiffness).
Supports: Required. Set Top Z Distance to 0.25mm - 0.3mm (if using the same material for supports) to ensure clean removal.
Orientation: Print flat for maximum fiber continuity along the mounting arms.
BOM (Hardware needed)
2x M3 Inox (Stainless) Nyloc Nuts
2x M3 x 20mm Inox Bolts
Note: Ensure bolt length is sufficient to fully engage the Nyloc ring.
1x Garmin Puck/Insert and screws (Original Garmin/SRAM style)
Weight: Approx. 14 grams (depending on filament density).
Safety Note: This is a structural part used on a moving vehicle. Periodically inspect for cracks or signs of fatigue, especially after riding on rough terrain. Use at your own risk.