Quilt Ruler Organizer (Parameterized)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€16.38 – €20.02 net (excluding VAT)
For file: quiltRulerHolder_0.3mm_PLA_MK3S_14h53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €18.20 excluding VAT (range midpoint).
- Weight reported by the author
- 297 g
- Print time reported by the author
- 14.88 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Parameterized model of a stand to hold quilting or sewing rulers.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 26
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mom wanted something to hold her quilting rulers and, by Jove, I wanted to be a good kid and make Mama happy. I didn't know what the optimal dimensions were so I put together a model I could iterate on.
Changeable parameters (Autodesk Help Page):
Number of slots (12 shown, fits on the Mk3S)
Slot depth
Min thickness (aka thickness of the base)
Slot/gap Width (model is at 3.4mm which works well for the 1/8" thickness rulers)
Distance between slots
Thickness of the last slot to the organizer edge
Edge Chamfer
Slot Radius
Holder Width (aka the length of the slot)
Model provided is for quantity 12 slots sized for 1/8" thick rulers and 200mm wide. It printed well vertically, with a brim, 0.3mm layer height, 2 perimeters, 15% gyroid infill.