Quilt Ruler Organizer (Parameterized)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parameterized model of a stand to hold quilting or sewing rulers.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mom wanted something to hold her quilting rulers and, by Jove, I wanted to be a good kid and make Mama happy. I didn't know what the optimal dimensions were so I put together a model I could iterate on.
Changeable parameters (Autodesk Help Page):
Number of slots (12 shown, fits on the Mk3S)
Slot depth
Min thickness (aka thickness of the base)
Slot/gap Width (model is at 3.4mm which works well for the 1/8" thickness rulers)
Distance between slots
Thickness of the last slot to the organizer edge
Edge Chamfer
Slot Radius
Holder Width (aka the length of the slot)
Model provided is for quantity 12 slots sized for 1/8" thick rulers and 200mm wide. It printed well vertically, with a brim, 0.3mm layer height, 2 perimeters, 15% gyroid infill.