Anycubic Kobra 3 V2 Cooling Shroud Upgrade V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved cooling system for the Anycubic Kobra 3 V2
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 116
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Improved cooling system for the Anycubic Kobra 3 - standard hotend. Improved cooling to the left of the hotend. Closer channeling to the nozzle. Print speed 30. Blowing 100%. No camera, no additional blowing.
Changes in version 2
During testing, a couple of defects were discovered.
1. Created access for nozzle illumination.
2. The airflow channels were widened to 3mm.
3. Changed the airflow angle.
4. Moved the mounting hole (not sure yet).
5. Too close to the hotend. Moved the wall slightly inward.
6. The internal volume is completely divided. (No space for a third hole.)
Print speed 36. Blowing 100%.
Problems: The channels become deformed due to temperature changes due to their close proximity.I need to try something with a higher melting point, but I don’t have these materials.
