1 / 4
Anycubic Kobra 3 V2 Cooling Shroud Upgrade V2 — zdjęcie 1
1 / 4

Anycubic Kobra 3 V2 Cooling Shroud Upgrade V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improved cooling system for the Anycubic Kobra 3 V2

Ocena
0 / 5
Polubienia
9
Pobrania
116
Wydruki
0
Wyświetlenia
515
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Improved cooling system for the Anycubic Kobra 3 - standard hotend. Improved cooling to the left of the hotend. Closer channeling to the nozzle. Print speed 30. Blowing 100%. No camera, no additional blowing.
Changes in version 2 
During testing, a couple of defects were discovered.

1. Created access for nozzle illumination.

2. The airflow channels were widened to 3mm.

3. Changed the airflow angle.

4. Moved the mounting hole (not sure yet).

5. Too close to the hotend. Moved the wall slightly inward.

6. The internal volume is completely divided. (No space for a third hole.)

Print speed 36. Blowing 100%.
Problems: The channels become deformed due to temperature changes due to their close proximity.I need to try something with a higher melting point, but I don’t have these materials.

Tagi