Snapmaker U1 wire shelf filament feeder relocation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feed your U1 easily from underneath (or wherever)!
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 54
- Makes
- 0
- Views
- 1,899
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This model is designed to help relocate your Snapmaker U1's filament feeders to the position of your choosing. My bracket is designed to clip onto wire shelving with 30mm on-center spacing (3mm rails), but can be easily customized in your choice of CAD software or slicer.
Also included a cover plate for the existing filament feeder slots on the sides of the printer with a guide for the wires. The retention tab for this isn't perfect but does the job. Works best printed in a semi-rigid material with good layer adhesion (I used Siraya Tech TPU-GF).
You'll need a set of JST-GH 1.25 15 pin extension cables long enough to get to your feeders from their original location. I had good success with https://www.aliexpress.us/item/3256810450992180.html but YMMV.