NR200 Full ATX PSU Bracket with 3.5" Drive Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remake of the official Cooler Master ATX PSU Bracket to allow for mounting of a 3.5" HDD.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
EDIT: v2: better support for mounting hard drive with top facing right. Most SATA angle cables are only down, so mounting the hard drive on it's right side/clockwise will allow use of these cables.
This is a remake of the official Cooler Master ATX PSU Bracket to allow for mounting of a 3.5" HDD.
There is space provided for you to put some foam or other material to cushion the the drive. The drive can be installed using SAE #6-32 available at your hardware store. 1/2 long screws for top and 3/4 for bottom.
As far as mounting to case, there are optional nut pockets if you don't want to thread into just the plastic.
Requires supports, organic recommended, for the bottom flange. Print with the flat top of the model down.
Made in FreeCAD 1.2 dev.
The cover photo differs slightly due to being an older print.
