Kingdom Come Razor Box (Phillips OneBlade)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the Phillips OneBlade inspired by Kingdom Come: Deliverance II, featuring a rubber band opening mechanism.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Overview
This box, designed for a Kingdom Come 2 contest, is primarily intended for home use. It provides sufficient space for the Phillips Oneblade and various trimming attachments. The box can be opened and closed using a practical closure mechanism that is revealed by sliding the Invictus sword. A rubber band can be used to adjust the counterforce required to move the sword.
Here is a short video explaining the mechanics:
Build
Printable pieces:
4x Pillars
2x Clean side wall or 2x Rabbit side wall
1x Back wall
1x Invictus sword
1x Tensioner
1x Base plate
1x Cover plate
1x Front wall
1x Front wall inner
Non printable piece:
1x Rubber band
Assembly Instruktion:
Attach the rubber band to the tensioner.
Place the tensioner on the inner wall. The rubber band can be positioned in various ways depending on the desired counterforce.
Connect the sword to the front wall and the tensioner.
Connect the assembly to the front pillars.
Connect the side walls, either the empty ones or the ones with the rabbit, to the front and rear pillars, and place the back wall between the rear pillars.
Place the base plate in the box.
Now all that remains is to connect the cover plate to the back panel, and it's done.
If you have any questions, please don't hesitate to send me a message.