1 / 14
Adjustable and Collapsible Magnetic Phone Monitor Mount (Remix) — image 1
1 / 14

Adjustable and Collapsible Magnetic Phone Monitor Mount (Remix)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adjustable and collapsible magnetic phone mount that can be used on the back of montior or laptop lid.

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
143
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

As promised, this is an update to my first version of this mount.  This version split the base to add spring loaded clips for quicker collapsnig of the mount.  Just compress the clips and flip! Easy!!  Again this uses M3 heatset inserts with four M3 x 6MM bolts for putting the base together and two M3 x 8MM or 10MM bolts for attaching the arm (washers optional).  The springs used in the buld were taken from two old Bic pens.  

Note: The build was done with PLA using 100% infill for strength.  I also printed the clips on end to make sure the tips are rounded.  The clips can be printed flat, but some light sanding may be needed to make the clips slide smooth.  

Tags